Casio XJ-M140 DLP Projector Laser/LED Hybrid - 1215 OEM Lamp Hours Used w/Bundle. Projector is Professionally Tested and is in an Ideal Working Order. We use Hospital Grade Disinfectant Cleaner for our items, which kills 99.9% of organisms.We take pride in the safety of our items. Lamp and filter are cleaned to improve image quality and extend life of the projector. 1215 OEM Lamp Hours Used. We guarantee a good image, little dust possible, which is typical for used projectors of this model. No other cables or accessories are included. A power cable is NOT included in international orders. The operation of any electronics using foreign adapters may cause the equipment to malfunction and/or become a fire hazard. We will include a high-quality Remote custom programmed to specifically work with this projector model. All photos presented are for illustrative purposes only, intended to accurately showcase the model and general condition of what you will receive. Equipment may have some cosmetic marks, scratches and/or blemishes in areas other than what is shown.
To maintain the highest standards of service to our customers we pledge ALL of the following. FREE accessories (all the necessary equipment to start operating your projector straight out of the box). Quality inspection/testing and professional refurbishing of all of our projectors by highly-experienced technicians only.
TeKswamp thoroughly tests, cleans and replaces any damaged or worn out parts, guaranteeing a properly functioning projector with a beautiful picture every single time! Information below is for educational purposes only and should be viewed as a constructive piece of advice. Projector Image Quality, Image Brightness, Thoroughness of Inspections, Proper Product Representation.
There are many factors that may affect image quality, brightness and overall value of a projector, most of which goes unnoticed by the untrained eye. Dust Optic Burns - Image Quality. Optic burns may discolor the image or create discolored spots. These spots can be caused by the long hours of use, inappropriate temperature or dust.
Dust accumulation is present in most used projectors. It tends to create darker projection image and can leave spots on the projection by getting attached to the optic inside. It may be nearly impossible to remove the dust from the optic without completely disassembling the projector first. It can also attach itself to heat sensitive areas of the projector, causing it to overheat or malfunction.
TeKswamp technicians check the quality of the projection image and thoroughly clean the inside and outside of the projectors to eliminate as much dust as possible. Important Information about Projector Lamps. Many non-authentic, non-OEM lamps can stop functioning within 6 to 12 months whether the projector has been used or not.
Generic lamps may produce a darker or brighter image than an OEM lamp. Non-authentic lamps die more quickly because of inferior build quality, when the gas sealed within the lamp begins to leak.
Also, the lamp can be brighter than specified and may burn the projector's optic by running on a higher temperature than the projector is designed for. TeKswamp ensures that you receive a lamp with low hours. In addition, we inspect every lamp to check for burns, dust and clarity of the lamp reflector. Used projectors MUST be thoroughly inspected and tested for optimal functionality and endurance. For example, some used projectors can overheat and simply turn off to prevent any further damage.
Also, it is hard to notice smaller malfunctions until it is too late, such as malfunctioning legs/buttons or high lamp hours, etc. Example: If a projector leg doesn't function properly, it could create some major hassle if you need to constantly set up, jimmy and move your projector around.TeKswamp inspects EVERY aspect of the projectors we sell. Why do we go through so much hassle? We Take Pride in Our Work and in Our Ability to Offer the Best High Tech Reconditioned Products Available on the market! Honest Product Representation Important Information with Regard to Projector Specifications. It is important to familiarize yourself with projector specifications.
You can decide for yourself whether a particular projector suits your type of needs. OCCASIONAL USAGE [Really Tight Budget, Bright Picture Required]. Examples: Family reunions, Parties, Ceremonies - when you want to make a great impression but have a limited budget.
Examples: For teachers, please consider a'Short Throw LCD Projector' that will not blind eyes every time they look at the projector. (Search "short throw projector" for more information). LCD projector 2000+ (recommended for a darker room) or 2500+ ANSI lumens. Important Note: DLP projectors are not recommended in this case. They are less reliable and create a rainbow effect in motion images.(Search: "DLP projector rainbow effect" for more information). COMMERCIAL USAGE (Powerpoints, Short Video Presentations).
Use LCD for lower-speed presentations, such as PowerPoint presentations. They produce richer color, more reliable in transportation, but bigger. Alternative: Use DLP for video presentations or when the size and weight are of importance: 3-4lb for DLP vs 6-7lb for LCD. WEEKLY USAGE (Home Theater, Games).High contrast LCD (preferably) 2000:1 or more. 3D DLP 3000+ lumens for 3D movies. Native Wide Resolution or at least 1024x768. OCCASIONAL USAGE (Home Theater, Games). DLP 2500+ lumens with HDMI adapter. Brightness of the projection is even more important outdoors. Please look for larger, commercial-grade projectors. They have better cooling abilities and can better cope with different weather conditions temperature, humidity, etc. Best Value Ultra+ Short Throw. This item is in the category "Consumer Electronics\TV, Video & Home Audio\TV & Video\Home Theater Projectors". The seller is "tekswamp_vision" and is located in this country: US. This item can be shipped worldwide.